![SLIK Plate III](https://jp.static.pronews.com/pronewscore/wp-content/uploads/2024/07/240705_slateiii_top.jpg)
The SLIK Plate III, which allows two cameras to be attached to one tripod, will be released on July 12, 2024. The estimated retail price is approximately $150.
The SLIK Plate III is a new product developed as an improved version of the Plate II, which has been popular since 1988. Two cameras (including video cameras) can be attached to one tripod, ensuring that the perfect shutter opportunity can be captured.
The tripod mounting screw is compatible with U1/4 inch, but there are also seven U1/4 female screws and five U3/8 inch female screws on the bottom, so it can also be mounted with U3/8 inch screws. In addition, the bottom is Arca-Swiss compatible, so it is compatible with Arca-Swiss and Slik Arca-compatible heads and clamps.
![240705_slateiii_01](https://jp.static.pronews.com/pronewscore/wp-content/uploads/2024/07/240705_slateiii_01.jpg)
Main Features
- The bottom is Arca-compatible: can be directly attached to Arca-Swiss compatible heads and clamps
- Smooth camera installation: The camera screw can be firmly fixed with a large tightening nut.
- Utilizing the tripod mounting screw: The tripod mounting screw can be fixed from above, so it can be attached to the bottom of the tripod elevator and used in a low position.
- Numerous screws on the bottom: 7 U1/4 inch (small screws) and 5 U3/8 inch. The range of uses can be expanded depending on how you use it.
![SLIK Plate III](https://jp.static.pronews.com/pronewscore/wp-content/uploads/2024/07/240705_slateiii_02.jpg)
SLIK Plate III Specifications
length | 330mm |
width | 40mm |
height | 22mm |
weight | 220g |
Country of manufacture | Made in Thailand |
Material | Aluminum |
Maximum payload | 2.5kg x 2 units, up to 5kg |